Break Out the Shake Out!

According to the Author:

Shake Out! is a fast, fun and easy game of dice rolling and set collecting with just a hint of 'take that' to keep things raucous around the game table. This game is perfect for gamers looking for something fast to play between longer games, families looking for  something everyone can play together and anyone looking to get non-gamer friends to the table with you. So if you're looking for a good time, Break Out the Shake Out!

Playability: If you can comprehend what a straight is (several dice of sequential value), what N of a kind would be, and are able to tell that a 6-5-4 straight bumps a 4-3-2 straight, then you've got all the mental horsepower you need to play (if not to win).

Strategy: Being dice based and fast, it is not exactly Advanced Squad Leader with all the expansions. On the other hand, you do have decisions to make every moment of your turns, which come fairly quickly.

You have to look at what you have rolled, what 9 cards are up to be played upon, and decide on how many dice to reroll and whether to change strategy for the 2nd reroll. You also have to decide if you have dice that could go in multiple places, what is the least likely to get bumped and most likely to return you the best point value. So there is some strategy here, although it tends to be short horizon.

Fun: This game is pretty good. Everyone I know so far who has played it has thought it was pretty good. I did get to help playtest and I think I helped tighten up the scoring to make the game even more competitive than it already was. The playtest version had the fun down, but it seemed like it needed to compress the scoring ranges a bit.


Having seen the result, I'd say it worked. The noobs playing it on 'official release night' were loving it! Their game ended with a tense 10% margin of victory and saw one player get 5 of a kind 5s and be dethroned by 5 of a kind 6s on the very next roll! That's almost the most fun you can have with your clothes on! (Almost... but probably is the most fun you can have with a family friendly game!)

Value: It can fit in between other games or be a night-ender or a casual game while people chat at a party. That means it has replayability. I'll also say I've payed much more for games I've only played once then never played again (Civilization with the 384 plastic playing pieces, I'm looking squarely at you!).

If I had any one demerit to attach, it would be that I'm not a fan of the box, but Louis wanted to keep the price reasonable and knew that a deck and dice based game could be put in a small box people might have or even a small bag, so I can't fault him for that. He wanted a smaller box, but you'd be shocked to know what that was worth from Gamecrafters. So, the box is kinda lame, but the consolation is that helped keep the game price down. The dice are okay and the cards are good quality with excellent art and good icon presentation. Easy to read even if you are colour blind, which is a nice touch.

Player Count: The game is a lot of fun for 2, 3 or 4 people. Played by 2, its is a bit more oriented around the set collecting with less bumping. Played with 4, the bumping can get cutthroat and set collecting is a bit harder. It works well for any number though.

Overall: I liked it enough I've picked up some copies for several gaming groups I see occasionally. It'll do well on nights where we don't have enough for Junta, BSG, Struggle of Empires, or something heavy like that. It's a great before dinner game while the food is cooking away and you want something fast that won't delay dinner. I was impressed by Louis' decent mechanics and his good visual presentation. For a first published game, it has more value than a lot of others I've payed more for who were written by supposedly full-time game designers.

Recommendation: Give it a try if you want something light and fun for 2-4. You won't be disappointed.

And for the record, I wouldn't be championing this game if I thought it sucked. I am anxiously looking forward to Richard and Louis getting 'Non-Stop Safari' into publishable shape. I played the demo for it and it played well and the game theme is just hilarious!

Moulding Projects

1. Variants of vehicles I already have. (For example, an AA Missile System on a Jeep)
2. Various sorts of hatches, cargo containers, etc. for sci-fi gaming.
3. Several (as yet to be completed) workstation models for starship crew.
4. A trauma tube model along with an ambulance vehicle variant.
5. A quadrapedal 'mule' with casevac capability. 
6. Some kinda fencing for wild west games (if I can't find a good cheap scratchbuild option).
7. Some variant starship models for my Full Thrust and Stargate games.
8. A Stargate Iris. 

These things are all on my 'to do' list. We'll see how fast I can make progress through the list. 

Misadventures in Moulding

Well, today was an attempt to create a two-part mould for some cacti, a pour mould for some scenery bits, and a pour mould for some vehicle bits.

Lessons Learned:

• Glue your work down in the mould box. Didn't matter much with heavier originals - they just sat there. Medium weight/size originals moved a bit when the airy RTV glooped around them, but no catastrophes. Polystyrene... floats! Whatever the aeration process is for the RTV, it got the polystyrene lightweight original parts floating. I actually had to use a brass rod to hold one of the pieces on the bottom of the mould box. Remains to be seen if that mould is FUBAR.
  
•   Have enough RTV. I used all I had, 2 lbs, and I ran short by (I figure) about another pound or at least 3/4 of one. The only serious part of the shortage is a pour mould with incomplete coverage of one high protrusion and another where I can see a shadow through the mould to a higher piece. Both, I'm hoping, can be salvaged by a subsequent pour on top of more RTV, once I have some. It's amazing how much of that stuff you'll go through, even when you try to keep space around the parts as small as you can while retaining wall strength. Odd shaped parts is obviously a factor - height seems to be critical - if you've got a big box and one part makes you pour more, it is a lot more!
  
• Mix, mix, mix the RTV. I thougth I did that. But the last part of the RTV, even after I scraped the walls during mixing repeatedly, always seemed to come out whitish rather than yellow. I think the only way to beat this is a) have a little extra of the additive on hand in case you are short a bit and b) buy a silicon scraper to scrape the inside of the jar during mixing and dumping out. It'll end up being a sacrificial tool, but if it makes for better pours, that's okay.
  
• Two part moulds are tricky. I still have to see if the second half of the cacti mould will work out right. You have to align any and all pieces on an axis that you want to be the mould centerline and glue them there and that's a feat. Then you have to pour in such a way as to get under your pieces but not up the sides or overtop. Sounds easy but a wide mouth 1 pound jar of RTV is no super accurate pouring tool. I have a lot of respect for the effort at building multi-part (more than 2) moulds that people use for spin-casting complex metal figure.
  
• The plastic blisters for miniatures are an excellent source of small mould boxes. Any other reasonably leak proof plastic container is another good choice - I've repurposed a plastic box from a 12 of Ferro Rocher chocolates as well as two old disposable tuperware containers. Only one warning: Rounded corners and trying to get pieces close to the edge to use minimal RTV without tearing are mutually oppositional. 

We'll see how this batch turns out. I've got 5 pounds of Quick Set from Alumalite coming and another pound of HS-III for some stuff I have with undercuts.

Once I finish the current batch of moulds, I'll try to pour and see what sorts of results I get. One of the items is a thin modern desk... I look forward to trying to get casts of that out of the mould without damaging the piece or the mould....

I also need to get some more dental plaster. My last set of casting experiments in plaster (some successful, some not - the tinfoil over a die-cast car to make a mould shell might work in Hot Wheels scale, but not in 28mm... the plaster is heavy enough to distory the tinfoil shell even when supported by sand or ballast. But Plaster works great as a replacement for resin for vehicles, especially if you can create mould voids using blocks. It's strong enough you don't need to mould an entire brick out of it (a shell will do) and takes detail just about as well as resin.

More as the next set of experiments are attempted....